In short
Blinking sensor light, door reversing, or a door that only closes while you hold the wall button: all three point to the photo-eye sensors. Clean and realign them first. If that doesn't work, call, and a technician in West Hartford repairs the sensors and re-tests the opener's safety system.

Doors that won't close in West Hartford
West Hartford was largely built in two waves, the 1920s and the 1950s, and both left garages that predate photo-eye sensors. Around the town center and West Hill, and on the east side, detached 1920s garages have wood jambs that swell and shrink, so the brackets drift out of line every winter. In Elmwood and the south end, small attached garages put the sensors where tires and snow shovels hit them. Around Bishops Corner and on the west side, 1950s and 60s garages face west more often than not, and the low afternoon sun in winter stops the door closing. Road salt and slush splashed on the lenses in January do the same.
Why a garage door refuses to close
- Door starts down, then goes back up. Something is blocking, or seems to be blocking, the two safety sensors near the floor.
- Opener light blinks and the door stays open. The sensors have lost sight of each other: a bumped bracket, a dirty lens or a broken wire.
- Door closes only if you hold the wall button. That is the opener overriding its sensors. It tells you the sensors are the problem, and it is not a way to run the door day to day.
- Door closes, touches the floor and reopens. The travel or force setting is off, or the floor has heaved and the door thinks it hit something.
What you can safely try yourself
Clear the doorway, clean both sensor lenses, and check that the two sensors point at each other at the same height. A steady light on each side means they can see each other. If one keeps blinking after that, or the wires look damaged, leave it for the technician.
Never disconnect the sensors or move them up out of the doorway to get the door working. They are what stops the door from closing on a child, a pet or a car.
What the technician does
- Checks power and wiring to both sensors and repairs any break.
- Realigns the sensors, or replaces the pair if one has failed.
- Resets the open and close travel so the door seals without straining.
- Tests the automatic reverse on an object in the doorway and with the beam blocked.
Around West Hartford
- Elmwood: The south side along New Britain Avenue, with capes and ranches from the post-war years.
- Bishops Corner: The north side around North Main and Albany Avenue, mostly 1940s-60s houses with attached garages.
See the full West Hartford service area.